How do I convert square metres to square yards?

Multiply by 1.19599. So 100 square metres × 1.19599 = 119.599 square yards. Because a square yard is the smaller unit, the number always gets larger — a useful check that you have not divided where you should have multiplied.

What is 1,000 square metres in square yards?

1,000 square metres is 1,195.99 square yards. The full sequence for round numbers: 1 square metre = 1.19599 square yards, 10 square metres = 11.9599 square yards, 100 square metres = 119.599 square yards, 1,000 square metres = 1,195.99 square yards. The relationship is strictly linear, so any value can be scaled from any other.

Is there a quick way to estimate square metres to square yards mentally?

Treat a square metre as 1.2 square yards instead of the exact 1.19599. That is out by about 0.34%, which is fine for judging whether something fits and not fine for cutting it. Anything that will be built to should use the exact figure — and there is no reason not to, since it is exact rather than an approximation of something messier.

What is a "square" in construction?

A hundred square feet, and it is standard in North American roofing. A roof described as thirty squares is 3,000 square feet, or about 279 square metres. Roofing materials are sold and priced by the square, and bundles of shingles are typically a third of one — so three bundles cover a square. The unit exists because a hundred square feet is a convenient bundle-sized quantity, and it has no metric equivalent, so anyone working across the boundary converts to square metres and back.

Why are area conversion factors the square of the linear ones?

Because area has two dimensions and both of them convert. A metre is 3.2808 feet, so a square metre is 3.2808 feet by 3.2808 feet — which is 10.7639 square feet, not 3.2808. Applying the linear factor to an area is the single most common error in this whole category, and it produces an answer wrong by roughly a factor of three, which is large enough to notice and not always large enough to look absurd. Volume compounds it further: the factor is cubed, so a cubic metre is 35.31 cubic feet.

What exactly is a hectare?

Ten thousand square metres — a square 100 metres on each side. It is not an SI unit but is accepted for use with SI, and it exists because the square metre is inconveniently small for land and the square kilometre inconveniently large. A hectare is roughly the size of an international rugby pitch including the in-goal areas, or about two and a half acres. Land, agriculture, forestry and planning use it almost universally outside the United States.

Why is an acre 4,840 square yards?

Because it was defined as a day of ploughing rather than as a shape. An acre was one furlong by one chain — 220 yards long by 22 wide — which is the area a team of oxen could plough in a day, long and thin because turning the team was slow. Multiply those and you get 4,840 square yards. Nothing about the number is derivable; it is the product of two older units that were themselves practical rather than mathematical, and it has been fixed at that value by statute since the medieval period.

Which is bigger, an acre or a hectare?

A hectare, by a factor of about two and a half. One hectare is 2.4710538 acres, and one acre is 0.40468564 hectares. The useful mental version is that a hectare is two and a half acres and an acre is four tenths of a hectare. That ratio matters commercially because land is priced per unit and quoted in whichever the local convention uses — so a price per acre and a price per hectare differ by 147% before any negotiation, and comparing them without converting is a substantial error.

Square Metres to Square Yards Converter

Square metres to square yards is the flooring conversion. Carpet, vinyl, laminate and turf are sold by the square yard in the United States and by the square metre almost everywhere else, and the two units are close enough in size that an unconverted number looks plausible and is wrong by about twenty percent. There a…

VALUE & FROM

1.19599

1 square meter = 1.19599 square yard · 1 square meter = 1.19599 square yard

1 square meter IN EVERY UNIT

METRIC (SI)

METRIC LAND

IMPERIAL / US

SOUTH ASIAN LAND

EAST ASIAN LAND

CONSTRUCTION

SCIENTIFIC

Created with❤️byeaglecalculator.com

HOW TO USE

1
Type the number of square metres into the value box. The converter opens with square metres and square yards already selected, so the answer appears as you type.
2
Read the result in square yards. The conversion is a multiplication by 1.19599, applied at full precision — the displayed rounding is for readability only.
3
Use the search box to switch either unit if you need a different pair. The same converter handles every length unit from the Planck length to the megaparsec.
4
Check the direction as a sanity test: converting to square yards must make the number larger, because a square yard is the smaller unit.

QUICK REFERENCE

1 m²

10.7639 ft²

1 ft²

0.092903 m²

1 acre

4,046.86 m²

1 hectare

2.47105 acres

1 acre

43,560 ft²

1 hectare

10,000 m²

1 sq mile

640 acres

1 km²

0.386102 mi²

1 yd²

9 ft²

1 m²

1,550 in²

ABOUT AREA UNITS

Area is measured against the square metre, the SI derived unit. Because area is length squared, each metric step is a hundredfold jump, not tenfold: a square metre is 10,000 square centimetres and 1,000,000 square millimetres. The everyday imperial units follow the same rule — a square yard is 9 square feet, and an acre is 43,560 square feet — while land is measured in acres, hectares (10,000 m²), ares and dunams. Traditional South Asian units are widely used for property: a guntha is 1⁄40 of an acre, a cent is 1⁄100 of an acre, and the bigha, katha, marla and kanal are common across India and Pakistan — though several of these vary by region, so this tool uses the most common standard values. East Asian units like the Japanese tsubo, the Korean pyeong and the Thai rai are included too, alongside the scientific barn (10⁻²⁸ m²) used for nuclear cross-sections. Every unit is stored as its exact number of square metres, so any conversion is just the input turned into square metres and then into the target unit.

FREQUENTLY ASKED QUESTIONS

One square metre is 1.19599 square yards. Put the other way round, there are 0.83612736 square metres in a square yard. That figure is exact rather than approximate. Area factors are the square of the linear ones, and the linear ones were fixed exactly by the 1959 International Yard and Pound Agreement — the inch at 25.4 mm, so the square inch at exactly 0.00064516 m².

1 square metre = 1.19599 square yards
1 square yard = 0.83612736 square metres
Exact by definition, not a measurement
10 square metres = 11.9599 square yards

RELATED CALCULATORS

Hectares to Acres

Open →

Hectares to Square Feet

Open →

Square Yards to Hectares

Open →

Square Kilometres to Square Feet

Open →

MORE AREA CALCULATORS

Square Feet to Acres

Calculate instantly →

Hectares to Square Metres

Calculate instantly →

Square Feet to Square Yards

Calculate instantly →

Square Kilometres to Hectares

Calculate instantly →

Square Meters to Square Centimeters

Calculate instantly →

Square Yards to Square Feet

Calculate instantly →

Square Meters to Square Feet

Calculate instantly →

Square Kilometres to Acres

Calculate instantly →

Square Kilometers to Square Miles

Calculate instantly →

Acres to Hectares

Calculate instantly →

Square Inches to Square Feet

Calculate instantly →

Mega Area Converter

Calculate instantly →

Square Feet to Square Meters

Calculate instantly →

Square Yards to Square Metres

Calculate instantly →

Square Metres to Acres

Calculate instantly →

Square Feet to Square Inches

Calculate instantly →

Square Miles to Square Kilometers

Calculate instantly →

Square Centimeters to Square Meters

Calculate instantly →

Hectares to Acres

Calculate instantly →

Acres to Square Metres

Calculate instantly →

Was this calculator helpful?

Last updated: — · 42 area units · Exact SI & imperial definitions · Verified by the EagleCalculator team · Eagle-eyed accuracy for every calculation.