How many bricks for a 3m × 2m wall?

A 3m × 2m wall is 6 square metres. At 59.3 bricks per square metre for a standard 215 by 65 millimetre brick with a 10 millimetre joint, that is 356 bricks for a single skin, or 392 once the usual ten percent is added for breakage and cuts. For a full-brick wall of two wythes, double it to about 784.

How many packs of bricks for a 3m × 2m wall?

Around 1 pack, taking a pack as 500 bricks — though pack sizes vary from about 400 to 500 by manufacturer, so check the delivery note. One pack covers this wall with some to spare, and that surplus is worth keeping: bricks from a later batch will not match, so the leftovers are the only bricks that will ever match this wall.

How long does a 3m × 2m wall take to build?

At 400 to 600 bricks a day for an experienced bricklayer, 392 bricks is roughly 1 to 1 days of laying for one person on straightforward work. A capable amateur laying 150 to 200 a day should allow 2 to 3 days. Openings, returns and cutting slow it down considerably more than height does.

What is a 3m × 2m wall usually for?

Porch, bin store or small outbuilding. The size decides more than the brick count: it decides whether the wall needs a scaffold, whether it needs movement joints, and whether a single skin is structurally adequate. At two metres it can be built from trestles, but a free-standing single skin at this height wants piers or a full-brick thickness for stability.

Do I need movement joints?

In any run over about ten to twelve metres of clay brickwork, yes. Brick expands with moisture and temperature over its life and a long unbroken run has nowhere to put that movement except into a crack. A movement joint is a deliberate vertical gap filled with compressible material and sealed, usually positioned at a pier where it is least visible. Concrete and calcium silicate bricks shrink instead of expanding and want joints rather closer, around six to nine metres.

What foundation does a brick wall need?

For a garden wall, a concrete strip at least 450 millimetres wide and 500 deep is a common minimum, going deeper on clay soils or near trees where seasonal movement is greater. The wall itself weighs a great deal — a single-skin wall is around 200 kilograms per square metre — and the foundation has to spread that into ground which moves. Building on anything less is the most reliable way to produce a wall that cracks along its length within a few winters.

What joint thickness should I use?

Ten millimetres is the standard and what almost all coverage figures assume. It is not arbitrary: brick sizes are designed around it, so 215 plus 10 gives a 225 millimetre module and four bricks plus joints come to exactly 900 millimetres. Working consistently at 10 millimetres is what makes courses line up with openings and with existing work. Going thicker reduces the brick count slightly and going thinner increases it, but the real cost of an inconsistent joint is that nothing lines up.

Should bricks be wet before laying?

It depends on the brick and the weather. Highly absorbent bricks in hot dry conditions will suck the water out of the mortar before the cement can hydrate, and damping them lightly prevents that. Dense engineering bricks and any brick in cool damp weather should be laid dry — a saturated brick floats on the mortar rather than bedding into it, and the wall moves as it dries. Concrete bricks and blocks should never be wetted, because they shrink as they dry and crack the joints.

What bond should I use?

Stretcher bond — every brick laid lengthwise, each course offset by half a brick — is the default for single-skin work and the only sensible choice for a cavity wall outer leaf, because there is nothing behind to bond into. Flemish and English bonds alternate headers and stretchers to tie two wythes together, so they need a full-brick wall and roughly double the bricks. Choose before ordering rather than after: the bond decides the wall thickness and the wall thickness decides the count.

Bricks for a 3m × 2m Wall

Six square metres is the side of a porch, one wall of a bin store, or a panel between two piers on a garden boundary. It is the size at which a wall stops being a single afternoon and becomes a proper day's work, and the size at which ordering becomes a real decision rather than a rounding. Bricks are sold by the pack..

WALL DIMENSIONS

BRICK TYPE

215 × 65mm face · 10mm joint · 59.3 bricks/m²

WALL THICKNESS

WALL HEIGHT (metres)

WALL LENGTH (metres)

OPENINGS — doors + windows (m² total)

m²

Standard door ~1.9m² · Standard window ~1.2m² · Enter 0 if none

WASTE ALLOWANCE (%)

5% = simple rectangular wall · 10% = standard · 15% = complex cuts / patterns

PRICE PER 1,000 BRICKS (optional)

US common face brick: $400–$900/1,000 · Premium: $1,000–$2,500+

RESULTS — UK Standard, 1 wythe

BRICKS NEEDED (incl. 10% waste)

392

bricks

MORTAR BAGS (80lb)

NET AREA

6.0 m²

BRICK MATERIAL COST

$274

at $700/1,000 bricks

WALL PATTERN — UK Standard

WALL SUMMARY

Gross wall area6.00 m²

Net area (less openings)6.00 m²

Bricks/m² (this type)59.26

Bricks net (no waste)356

Bricks + 10% waste392

Mortar (pre-mix 80lb bags)10

Mortar volume0.223 m³

Brick material cost$274

BRICK SIZE REFERENCE

US Standard203.2×57.15mm · 70.5/m²

US Modular194×57mm · 73.9/m²

UK Standard215×65mm · 59.3/m²

Australia Standard230×76mm · 48.4/m²

Metric Modular200×100mm · 43.3/m²

WASTE GUIDE

Simple rectangular walls, no cuts

Standard walls with few openings

10%

Typical residential — recommended

15%

Complex shapes, patterns, arches

Created with❤️byeaglecalculator.com

HOW TO USE

1
The calculator opens with 3 metres long by 2 metres high already entered, in metric, with a standard 215 by 65 millimetre brick selected.
2
Change the brick type if yours differs — US Standard, US Modular and Australian sizes are all there, and the coverage changes substantially between them.
3
Set the wythes to two if this is a full-brick wall rather than a single skin. That doubles the count, and for a free-standing wall at 2 metres it is usually the right setting.
4
Enter any openings as an area to deduct. On a wall this size a single door or window is a meaningful fraction of the total.

WORKED EXAMPLE

A 3m × 2m wall in standard 215 by 65 millimetre brick with a 10 millimetre joint, single skin. The area is 3 × 2 = 6 square metres. Each brick occupies a module of 225 by 75 millimetres — the brick plus one joint on two sides — which is 0.016875 square metres. One divided by that gives 59.26 bricks per square metre. So 6 × 59.26 = 356 bricks for the bare wall. Adding ten percent for breakage and cuts brings the order to 392. Note what happens if you work from the brick rather than the module: 215 by 65 is 0.013975 square metres, giving 71.6 bricks per square metre and 473 for this wall. That is about 21% too many — on this wall, 81 bricks bought for nothing. For a full-brick wall of two wythes, double the figure to 784.

FREQUENTLY ASKED QUESTIONS

RELATED CALCULATORS

Mortar Calculator

Calculate instantly

Brick Calculator

Calculate instantly

Bricks for 8m × 3m Wall Calculator

Calculate instantly

Bricks for 4m × 3m Wall Calculator

Calculate instantly

MORE BRICKLAYING CALCULATORS

Brick Calculator

Calculate instantly →

Concrete Block Calculator

Calculate instantly →

Mortar Calculator

Calculate instantly →

Wall Area Calculator

Calculate instantly →

Stone Cladding Calculator

Calculate instantly →

Cement Blocks Per Square Metre

Calculate instantly →

Bricks for 2m × 2m Wall Calculator

Calculate instantly →

Bricks for 4m × 2m Wall Calculator

Calculate instantly →

Bricks for 4m × 3m Wall Calculator

Calculate instantly →

Bricks for 5m × 3m Wall Calculator

Calculate instantly →

Bricks for 6m × 3m Wall Calculator

Calculate instantly →

Bricks for 8m × 3m Wall Calculator

Calculate instantly →

Bricks for 10m × 3m Wall Calculator

Calculate instantly →

Bricks for 15m × 3m Wall Calculator

Calculate instantly →

Bricks for 20m × 3m Wall Calculator

Calculate instantly →

Was this calculator helpful?

Last updated: July 29, 2026 · Formula verified by EagleCalculator team · Eagle-eyed accuracy for every calculation.